Shenzhen InkMall Tech Co., Limited

  As a   Wall Paper UV Ink Manufacturer , share with you. The thickness of the ink jetted when the UV printer is working is related to the quality of the printing the effect, so be careful when adjusting. Three factors need to be considered when adjusting ink thickness: 1. Printed materials UV printer printing material type and background color, the ink thickness should be adjusted according to the material. If the surface of the printing material is soft, the gap is large, and the background color is dark, for example, leather and other materials need to increase a certain amount of ink. 2. Pattern requirements Need to adjust the ink thickness according to the color of the pattern. If the pattern to be printed is bright and dark, the thickness of the ink needs to be increased appropriately; otherwise, the thickness of the ink must be reduced. 3.Printing effect Adjust the ink thickness according to the desired printing effect. If you want to print a 3D relief effect, you need to increa

  As a   Uv Ink Supplier for Epson , share with you. During the printing process, the voltage is always changing in real time, which depends on the "temperature-pressure curve". The temperature-pressure curve simply means that the working voltage of the nozzle will change with the temperature. Speaking of temperature and pressure curves, we must talk about the characteristics of ink. Because the ink changes with temperature, the viscosity will also change. For example, if the temperature increases by 5°C, the viscosity of the ink decreases by two values, and the ejection force (voltage value) required by the piezoelectric ceramic also needs to be reduced accordingly. Epson Uv Ink Simply put, when the viscosity of the ink increases or decreases, the voltage required by the piezoelectric ceramic of the print head also needs to be adjusted. The viscosity increases and the voltage increases. The viscosity decreases and the voltage decreases. The influence of UV printer voltage on

  As an   Epson Uv Ink Manufacturer , I would like to share with you how to save ink for UV printers. Method one, manual and automatic combined with drawing ink. Method two, do not start the device frequently. Because every time it is started, the device must perform a comprehensive automatic detection, which not only takes time, but also involves cleaning the print head and filling the ink delivery system. This will waste some ink, and it is best to switch the machine on and off once a day. Method three, printing mode. Different printing modes consume ink to different extents. According to the actual printing accuracy, the number of printing passes, and the printing materials, the appropriate printing method should be selected to avoid unnecessary waste. Epson Dx5 Ink Three cleaning methods when the nozzle of UV printer is blocked: One, simple cleaning Use a soft brush or other dipped nozzle cleaning fluid to clean the ink outside the nozzle, and use a vacuum cleaner to suck out the r

  If the UV printer accidentally adds ink that is different from the ink cartridge, it is easy to cause the two inks to be incompatible. Make deposits in the ink path, block the ink path system or nozzles, and cause unnecessary losses.   As a  UV Ink Supplier , share with you.  Once the wrong UV ink is added, there are the following four solutions: Konica UV Ink One: The UV ink has just been added to the ink cartridge and has not yet entered the ink supply path. In this case, you only need to replace a new ink cartridge. Two: If the UV ink has entered the ink supply ink path, the entire ink path needs to be cleaned and the corresponding filter must be replaced. If it is not clean, the entire ink supply system needs to be replaced. Three. If the cleaning function has been turned on, it means that the ink has entered the print head. At this time, you need to remove the print head immediately, clean the print head with cleaning fluid, and discharge the ink as much as possible. Four. If th

  As a   Uv Ink Supplier , share with you. If the UV printer accidentally adds an ink that is different from the ink cartridge, it is easy to cause the two inks to be incompatible. Make deposits in the ink path, block the ink path system or nozzles, and cause unnecessary losses. Once the wrong UV ink is added, there are the following four solutions: Uv-Curable Ink For Ricoh Gen5 1. The UV ink has just been added to the ink cartridge and has not yet entered the ink supply path. In this case, you only need to replace a new ink cartridge. 2. If the UV ink has entered the ink supply path, the entire ink path needs to be cleaned, and the corresponding filter must be replaced. If it is not clean, the entire ink supply system needs to be replaced. 3. If the cleaning function has been turned on, it means that the ink has entered the nozzle. At this time, you need to remove the nozzle immediately, clean the nozzle with cleaning fluid, and discharge all the ink as much as possible. Fourth, if th